Pressure Transducers

ETC GEMS Pressure Transducer

High Quality Pressure Sensors

ETC is an authorized distributor of the GEMS 31CS Series product family of pressure transducers. GEMS pressure sensors feature all stainless steel wetted parts, a broad selection of electrical and pressure connections and a wide choice of electrical outputs. For more information visit the product page on the GEMS website.

GEMS Website   Full Specs   Order Now

 

 SPECIFICATIONS

ET-00000-0001-0500

ET-00000-0001-1001

ET-00000-0001-3001

Output 0.5 V – 4.5 V Ratiometric 0.5 V – 4.5 V Ratiometric 0.5 V – 4.5 V Ratiometric
Pressure Range 0-500 psi 0-1000 psi 0-3000 psi
Pressure Port 1/4″ – 18 NPT External 1/4″ – 18 NPT External 1/4″ – 18 NPT External
Electrical Connection 1/2″ NPT, Male conduit 1/2″ NPT, Male conduit 1/2″ NPT, Male conduit
Operating Temperature  -40°C to +80°C (-40°F to +176°F)  -40°C to +80°C (-40°F to +176°F)  -40°C to +80°C (-40°F to +176°F)
Cable Length 1 Meter (3 feet) 1 Meter (3 feet) 1 Meter (3 feet)
Certification Class I, Division 1, Groups C and D
Class I, Zone 0 Ex ia IIB T4 Ga
Class I, Zone 0 AEx ia IIB T4 Ga
Class I, Division 1, Groups C and D
Class I, Zone 0 Ex ia IIB T4 Ga
Class I, Zone 0 AEx ia IIB T4 Ga
Class I, Division 1, Groups C and D
Class I, Zone 0 Ex ia IIB T4 Ga
Class I, Zone 0 AEx ia IIB T4 Ga

Case Studies

Major producer in South Texas uses ALiEn2 to achieve 16,000% ROI

The ALiEn2 plunger controller replaced a competitive controller on a plunger lift well that was not meeting production expectations. Production was doubled within 12 days and the well has continued producing at the higher rate since.

Read More

Cyclops proves 100% accuracy, becomes standard for major producer in the San Juan Basin

The Cyclops sensor was installed on wells that were frequently missing plunger arrivals, leading to 100% reliable detection of the plunger.

Read More